diy electronics

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

Tech Ingredients shows how to build cheap, high-performance flat-panel speakers using audio exciters on sheet materials such as foam-core board. It explains how distributed-mode speakers work and walks through experiments to find good designs.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

Dave Jones builds the Evil Mad Scientist discrete-component 555 timer kit, then tests it and explains the internal circuitry of the 555 at transistor level. He finishes with scope waveforms.

Big Clive shows how to pick up discarded disposable vape devices from the roadside and extract the rechargeable lithium cells inside. He explains why these devices contain the same circuitry as rechargeable ones and how to reuse the cells.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

Tech Ingredients shows how to build flat panel speakers from exciters and foam board, with construction guidelines, measured SPL comparisons and a complete system playing music.

DIY Perks shows how to turn old or smashed TVs and monitors into realistic artificial window lights, using the backlight and Fresnel lens to simulate distant daylight.

DIY Perks builds a webcam mod using a two-way mirror in a box so the camera sits behind the screen image. This allows real eye contact on video calls.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

GE Lighting's official how-to for factory resetting C by GE smart bulbs, using a long sequence of precisely timed on and off cycles.

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

A woodworker shows how his table saw accident happened, why it happened and how to avoid a similar one. He describes severe hand lacerations from a blade contact.

Tech Ingredients shows how to make a homemade radiative cooling paint, with a custom liquid panel that cools below ambient temperature outdoors. The video covers the materials and how to apply the paint.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.

NightHawkInLight shows how to make ultra-white radiative paint that cools surfaces below ambient temperature without electricity. He walks through the research papers and the household-materials process.

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

The Thought Emporium shows how easily bacteria can be genetically modified to produce fluorescent proteins and even bioluminesce, with techniques doable at home. It links to companion videos on incubators, DNA extraction and gels.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.

A roughly 90-minute film of John Dobson building a Dobsonian telescope step by step, including hand-grinding the mirror.

A beginner-focused tutorial on freehand knife sharpening with a single stone, aiming for a shaving-sharp edge in about five minutes.

ElectroBOOM's Mehdi Sadaghdar explains how a full bridge rectifier works, the building block of AC to DC converters, with his usual humor and a demonstration of the circuit.

Dave Jones of EEVblog shows hand soldering of surface-mount parts, including drag soldering and tack-and-reflow of 0.5mm fine-pitch ICs, with solder paste and hot air.

Ben Krasnow of Applied Science shows how to make small batches of specialty glass with minimal equipment, including designing and making photochromic glass. He covers ingredients, melting and the challenges involved.