diy

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

A woodworker shows how his table saw accident happened, why it happened and how to avoid a similar one. He describes severe hand lacerations from a blade contact.

DIY Perks shows how to turn old or smashed TVs and monitors into realistic artificial window lights, using the backlight and Fresnel lens to simulate distant daylight.

DIY Perks builds a webcam mod using a two-way mirror in a box so the camera sits behind the screen image. This allows real eye contact on video calls.

A beginner-focused tutorial on freehand knife sharpening with a single stone, aiming for a shaving-sharp edge in about five minutes.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

Essential Craftsman announces the start of a spec house build on a scenic lot, kicking off a long series. The channel covers every step of building a house from the viewpoint of a general contractor.

Lock-picking YouTuber Bill Johnson (BosnianBill) explains how to choose a high-security lock and why, showing examples and comparing designs. It covers what makes some padlocks more pick-resistant than others.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Big Clive shows how to pick up discarded disposable vape devices from the roadside and extract the rechargeable lithium cells inside. He explains why these devices contain the same circuitry as rechargeable ones and how to reuse the cells.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

A This Old House segment where Richard Trethewey installs a heat exchanger that uses waste heat from a central air conditioner to heat a swimming pool.

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

Ben Krasnow of Applied Science shows how to make and test YBCO high-temperature superconductor with a kiln and eBay chemicals. He demonstrates flux pinning and shows a close-up of the crystal structure.