epa

A short walkthrough of a hack that tricks a Brother laser printer into accepting third-party toner by working around its genuine-toner check. It notes this may void the warranty.

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

Dave Jones of EEVblog shows hand soldering of surface-mount parts, including drag soldering and tack-and-reflow of 0.5mm fine-pitch ICs, with solder paste and hot air.

A three-minute demonstration of professional hand-soldering techniques for multi-lead surface mount parts, to IPC class 3 criteria.

CuriousMarc inspects a newly arrived Teletype Model 19, an early military unit built around a Model 15 keyboard and printer, after an initial rough cleaning. It is the first part of a restoration series and touches on 5-bit Baudot code.

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

A 1930s Chevrolet training film explaining the principles and development of the differential gear. It builds the idea step by step from first principles to the finished mechanism.

A motorcycle safety video on the SMIDSY (sorry mate, I didn't see you) accident, explaining the perception and optical illusion that makes drivers fail to see riders, and how riders can spot the signs and avoid it.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.

Terry Moore's three-minute TED talk showing a better way to tie shoes, replacing the common granny knot with a square knot so laces stay tied.

A beginner-focused tutorial on freehand knife sharpening with a single stone, aiming for a shaving-sharp edge in about five minutes.

DIY Perks shows how to turn old or smashed TVs and monitors into realistic artificial window lights, using the backlight and Fresnel lens to simulate distant daylight.

Essential Craftsman announces the start of a spec house build on a scenic lot, kicking off a long series. The channel covers every step of building a house from the viewpoint of a general contractor.

Lock-picking YouTuber Bill Johnson (BosnianBill) explains how to choose a high-security lock and why, showing examples and comparing designs. It covers what makes some padlocks more pick-resistant than others.

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

A woodworker shows how his table saw accident happened, why it happened and how to avoid a similar one. He describes severe hand lacerations from a blade contact.

Matt Risinger covers installing a Zehnder ERV fresh-air system in a tight passive house, explaining balanced ventilation, the benefits of heat recovery and the costs involved.

A 2018 vlog showing how to use the windshield wipers on a Tesla Model 3, including auto mode, manual settings and voice commands. It is labeled outdated.

A guide to charging a non-Tesla EV, here a BMW i4, at a Tesla Supercharger in the UK, with do's and don'ts. It shows the process in practice now that the network is open to all cars.

A This Old House segment where Richard Trethewey installs a heat exchanger that uses waste heat from a central air conditioner to heat a swimming pool.