ps/2

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

Technology Connections shows a cheap method for capturing analog video: a composite-to-HDMI upscaler feeding an HDMI capture dongle, aimed at digitizing home movies and VHS tapes.

A roughly 45-minute vintage US military instructional film that gives a comprehensive overview of celestial navigation, covering sextant use and the theory behind lines of position.

The UK DVSA's one-minute guide to the hazard perception part of the driving theory test, covering when to click and how to score well.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

ChefSteps shows how to make espresso-style coffee in a moka pot, with a bonus latte hack. It is a quick how-to aimed at home brewers.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

An 11-minute guided Wim Hof breathing session built around an expanding and contracting bubble to pace the breath. Wim breathes along with the viewer over ambient sound.

Dean Friedman's near-hour-long introduction to synthesis, covering the building blocks of sound and the controls on a synthesizer. He slowly adjusts knobs so viewers hear what each parameter does.

Allieway Audio gives an informal introduction and live-coding demo of ORCA, a free esoteric programming environment for building procedural sequencers from Hundred Rabbits. It walks through the interface and how to make music with it.

Andrew Huang teaches the basics of music theory in about half an hour, covering intervals, chords and patterns. He stresses understanding how music works over memorizing terminology.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

A roughly 90-minute film of John Dobson building a Dobsonian telescope step by step, including hand-grinding the mirror.

The first episode of Clickspring's series building a John Wilding skeleton clock from raw stock in a home machine shop. It covers making the frames along with the tools needed for the job.

Ben Eater writes a program in a made-up machine language and walks through the control logic an 8-bit breadboard CPU needs to execute it. It is part of his build-an-8-bit-computer series.

Essential Craftsman announces the start of a spec house build on a scenic lot, kicking off a long series. The channel covers every step of building a house from the viewpoint of a general contractor.

Jerobeam Fenderson shows how to draw a mushroom on an oscilloscope in XY mode using stereo audio, then animates it by modulating with a larger wave. Pd and Max4Live patches are provided.

ElectroBOOM's Mehdi Sadaghdar explains how a full bridge rectifier works, the building block of AC to DC converters, with his usual humor and a demonstration of the circuit.

Dave Jones of EEVblog shows hand soldering of surface-mount parts, including drag soldering and tack-and-reflow of 0.5mm fine-pitch ICs, with solder paste and hot air.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Dave Jones builds the Evil Mad Scientist discrete-component 555 timer kit, then tests it and explains the internal circuitry of the 555 at transistor level. He finishes with scope waveforms.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Ben Krasnow of Applied Science shows how to make small batches of specialty glass with minimal equipment, including designing and making photochromic glass. He covers ingredients, melting and the challenges involved.

Ben Eater shows how to build logic gates out of transistors, including NOR gates. It is part of his clear hardware-from-scratch teaching style.

A three-minute demonstration of professional hand-soldering techniques for multi-lead surface mount parts, to IPC class 3 criteria.

Dave Jones of EEVblog and Richard Stephenson tour the 70m DSS43 dish at the Canberra Deep Space Communication Complex and explain how NASA talks to Voyager 2. It covers the transmitters, receivers and tracking involved.

A woodworker shows how his table saw accident happened, why it happened and how to avoid a similar one. He describes severe hand lacerations from a blade contact.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

Matt Risinger demonstrates a blower door test on a house, using a fan to measure air leakage and find where air gets in and out. It shows how the test reveals the quality of the build.

Ben Eater finishes building a minimal VGA video card from logic circuits. He explains analog RGB signals, stores an image in an EEPROM and builds a simple digital-to-analog converter to display it.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

GE Lighting's official how-to for factory resetting C by GE smart bulbs, using a long sequence of precisely timed on and off cycles.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.

A This Old House segment where Richard Trethewey installs a heat exchanger that uses waste heat from a central air conditioner to heat a swimming pool.

A short promotional video demonstrating a head-thumping technique that is claimed to relieve tinnitus. Covering the ears and tapping the back of the head is said to silence the ringing temporarily.