rocket manufacturing

Destin Sandlin tours United Launch Alliance's rocket factory with CEO Tory Bruno, showing friction stir welding, structural rocket skins and large milled parts.

A Veritasium video touring Relativity Space and explaining why 3D printing whole rockets cuts tooling costs, allows rapid iteration, reduces part count and enables new designs. It includes an interview with Scott Manley on aerospace engineering.

Everyday Astronaut's Tim Dodd runs an hour-long, data-driven analysis of what rockets actually emit and how that compares with airliners and other industries. It breaks down exhaust by propellant type, per-passenger and total emissions, and ways launches could be cleaner.

Scott Manley explains the plumbing of rocket engines, including pressure-fed, gas generator, expander and staged combustion cycles. He shows why more complex designs exist and what they gain.

A two-minute explanation of what a rocket mass heater is, starting from how a conventional wood stove works and why creosote and chimney fires occur. It shows how burning hot and storing the heat in thermal mass makes for an efficient heater.

Joe Barnard of BPS.space shows his model rocket Scout F landing vertically like a SpaceX booster after seven years of attempts. The video documents the successful landing and the build-up to it.

Scott Manley explains the nuclear salt water rocket, Robert Zubrin's concept of a rocket fueled by a rapid nuclear reaction in uranium salt dissolved in water. He covers its extraordinary performance and the dangers of managing it.

Curious Droid surveys vertical take-off and landing rockets that predate SpaceX and Blue Origin, including the McDonnell Douglas DC-X of the 1990s. It shows that propulsive landing has about 60 years of history.

A one-minute clip of an Atlas Agena rocket losing pressure on the pad and collapsing. The Atlas relied on tank pressurization for structural integrity, so a simple failure tore it apart.

Everyday Astronaut explains the basic physics of rocket engines, the main engine cycles and fuel types, then compares SpaceX's methane-fueled full-flow staged combustion Raptor to other engines. It runs nearly 50 minutes with chapter markers.

A very long, detailed look at the A4/V2 rocket turbopump, the steam-turbine-driven twin propellant pump system. It covers the peroxide and permanganate catalysis that drives the turbine. This is part 1 of a series on V2 components.

Tim Dodd's hour-long deep dive on how rocket engines start, from solid motors to liquid engines. It covers thermal conditioning, spin-up, ignition methods, starting in space, and a step-by-step RS-25 startup.

A 1966 NASA safety film teaching workers how to handle toxic rocket propellants such as hydrazine and nitrogen tetroxide. It explains the hazards of these corrosive, flammable and toxic chemicals and what to do after contamination.

A nine-minute excerpt from the 1992 documentary Manufacturing Consent in which Noam Chomsky summarizes how corporate media shapes public discourse.

A HOPE09 talk on how modern computer chips are manufactured, from 22nm transistors to ultra-clean fabs and the tricks used to pattern tiny features with light. It frames chipmaking as hacking electrical engineering and physics.

Destin Sandlin of Smarter Every Day tries to manufacture a grill scrubber entirely in the United States. Along the way he runs into missing supply chains, tooling and institutional manufacturing knowledge.

Strange Parts tours JLCPCB's large PCB factory in Huizhou, China, walking through the printed circuit board manufacturing process step by step. It shows the machinery, quality checks and scale behind cheap prototype boards.

A Channel 4 Equinox documentary on the NK-33 engines built for the Soviet N1 moon rocket and how they ended up in the USA. It includes rare footage and interviews with veterans of the early Soviet space program.

Branch Education walks through a semiconductor fab and the dozens of steps used to turn silicon wafers into microchips, with 3D animation. It covers lithography, deposition and etching at a high level.

A 1936 Chevrolet promotional drama, 'Master Hands', showing car manufacturing from foundry to finished vehicle in Flint, Michigan. It is a National Film Registry selection and a record of early mass production.

SpaceX footage of the Grasshopper vehicle's 744 m test hop, filmed from a hexacopter that gets closer than earlier flights. Grasshopper was a vertical takeoff and landing rig built to test returning rockets to the pad.

Short Curious Droid video on why NASA could not simply rebuild the Saturn V's Rocketdyne F-1 engine for the SLS boosters. It explains that the engines were hand-tailored and that much of the know-how was never documented, so the blueprints were not enough.

Footage of DC-X Flight 8 from July 1995 at White Sands, in which the Delta Clipper Experimental reusable rocket turned over into a re-entry profile and re-oriented itself for landing.

SpaceX engineers present at NVIDIA's GPU Technology Conference on a multi-physics code that simulates the full-scale Raptor methane engine. It covers GPU-based turbulent combustion modeling with adaptive grids and wavelet compression.

Destin Sandlin of Smarter Every Day tours a Kodak factory to show how photographic film is manufactured. This is part one of a three-part series covering the large-scale coating and production process.

SpaceX's own compilation of failed orbital booster landing attempts, set to sound, showing the crashes before landings succeeded.

Scott Manley looks at SpinLaunch, which aims to throw launch vehicles out of a spinning launcher at hypersonic speed. He covers its recent Mach 1 test of a one-third scale launcher and the engineering problems that remain.

A four-pane view of Armadillo Aerospace's Mod vehicle on a June 2010 boosted hop. The flight includes engine shutdown, drogue chute deployment, an engine restart and a safe landing.

Destin Sandlin tours a progressive metal stamping factory, showing machines that stamp millions of metal parts and the tooling behind them.

Footage of the Mercedes A-Class production line at the Rastatt plant in Germany, filmed in 2013. It shows robots and fixtures working through assembly.

SpaceX footage of the Grasshopper reusable rocket prototype flying 325 m before landing on its pad. It was the first test to use the full navigation sensor suite and closed-loop control for a precision landing.

Tim Dodd of Everyday Astronaut tours SpaceX's Starbase with Elon Musk as guide. They cover the high bay, grid fins, Raptor V2, the HLS lander and stage separation, and Musk explains his engineering management process.

An Autoline After Hours episode with teardown expert Sandy Munro and a panel of auto journalists. It covers his Tesla Model 3 teardown, including the battery, drive modules, build quality and manufacturing automation.

Machine Thinking argues the 1751 machine, a metal-cutting lathe associated with Vaucanson, triggered the biggest explosion of wealth in history by enabling precise manufacturing of other machines.

A five-hour Lex Fridman interview with John Carmack covering Doom, Quake, VR, AGI, programming, games and rockets.

Tom Lehrer's satirical song about Wernher von Braun, the German rocket scientist who went from the Nazi missile program to the US space program. It includes the famous line about not caring where the rockets come down.

Everyday Astronaut takes a tour of SpaceX's Starbase with Elon Musk as guide. Topics include the Raptor engines, launch escape systems, the heat shield and the first orbital test.

Valve's short video on building the Steam Controller on a heavily automated assembly line, which the company designed itself. It shows the robotic manufacturing process and US final assembly.

A short test firing of the XRS-2200 linear aerospike engine at NASA Stennis Space Center, which was designed for the cancelled X-33 VentureStar. The engine is shown at roughly 80 percent of max thrust.

A lecture by Noam Chomsky on thought control in democratic societies, covering propaganda and manufacturing consent. The upload has no description.