diy science

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

Tech Ingredients shows how to build cheap, high-performance flat-panel speakers using audio exciters on sheet materials such as foam-core board. It explains how distributed-mode speakers work and walks through experiments to find good designs.

Ben Krasnow of Applied Science shows how to make and test YBCO high-temperature superconductor with a kiln and eBay chemicals. He demonstrates flux pinning and shows a close-up of the crystal structure.

Tech Ingredients shows how to make a homemade radiative cooling paint, with a custom liquid panel that cools below ambient temperature outdoors. The video covers the materials and how to apply the paint.

NightHawkInLight shows how to make ultra-white radiative paint that cools surfaces below ambient temperature without electricity. He walks through the research papers and the household-materials process.

Tech Ingredients shows how to build flat panel speakers from exciters and foam board, with construction guidelines, measured SPL comparisons and a complete system playing music.

DIY Perks shows how to turn old or smashed TVs and monitors into realistic artificial window lights, using the backlight and Fresnel lens to simulate distant daylight.

DIY Perks builds a webcam mod using a two-way mirror in a box so the camera sits behind the screen image. This allows real eye contact on video calls.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Ben Krasnow of Applied Science shows how to make small batches of specialty glass with minimal equipment, including designing and making photochromic glass. He covers ingredients, melting and the challenges involved.

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

A woodworker shows how his table saw accident happened, why it happened and how to avoid a similar one. He describes severe hand lacerations from a blade contact.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

The Thought Emporium shows how easily bacteria can be genetically modified to produce fluorescent proteins and even bioluminesce, with techniques doable at home. It links to companion videos on incubators, DNA extraction and gels.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

Ben Krasnow of Applied Science uses an antique 4x5 view camera to make high-resolution photolithography masks in a home shop. He photographs a poster-sized printout onto litho film to get features around 20 microns.

A roughly 90-minute film of John Dobson building a Dobsonian telescope step by step, including hand-grinding the mirror.

A beginner-focused tutorial on freehand knife sharpening with a single stone, aiming for a shaving-sharp edge in about five minutes.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

Matt Risinger demonstrates a blower door test on a house, using a fan to measure air leakage and find where air gets in and out. It shows how the test reveals the quality of the build.

Tech Ingredients shows how to build a liquid panel with a specialty paint that, placed outside, cools below ambient air temperature. It demonstrates radiative sky cooling.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

Wim Hof guides viewers step by step through his breathing method, with some explanation of the science he cites behind it. It stresses learning from the source and avoiding unsafe settings.