hardware hack

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

Loopop reviews the Polyend Tracker hardware tracker-style sequencer and walks through a tutorial from sampling to finishing a song. It covers most of the device's features.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

The first video in Photon of Scoopex's Amiga hardware programming series. It shows how to set up an assembler and write a minimal 68000 program that waits for a left mouse click.

In a long live-coding session, Andreas Kling works on making the Cookie Clicker game playable in the Ladybird browser from SerenityOS. He tracks down bugs in the browser engine and fixes them.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

Jeremy Howard's 90-minute practical tour of language models. It covers how they work, GPT-4's capabilities and limits, using the OpenAI API, code writing, data analysis and fine-tuning.

Terry Moore's three-minute TED talk showing a better way to tie shoes, replacing the common granny knot with a square knot so laces stay tied.

A short walkthrough of a hack that tricks a Brother laser printer into accepting third-party toner by working around its genuine-toner check. It notes this may void the warranty.

A roughly 90-minute film of John Dobson building a Dobsonian telescope step by step, including hand-grinding the mirror.

The first lesson of MangoJelly's FreeCAD 0.20 beginner course, covering setup, preferences and navigation. The series teaches fundamentals through complete workflows such as sketching, Part Design and STL export.

DIY Perks shows how to turn old or smashed TVs and monitors into realistic artificial window lights, using the backlight and Fresnel lens to simulate distant daylight.

Tech Ingredients shows how to build flat panel speakers from exciters and foam board, with construction guidelines, measured SPL comparisons and a complete system playing music.

DIY Perks builds a webcam mod using a two-way mirror in a box so the camera sits behind the screen image. This allows real eye contact on video calls.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Dave Jones builds the Evil Mad Scientist discrete-component 555 timer kit, then tests it and explains the internal circuitry of the 555 at transistor level. He finishes with scope waveforms.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

The trailer for Tim Hunkin's series The Secret Life of Components, eight guides to mechanical and electromechanical parts for designers and makers.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

Big Clive shows how to pick up discarded disposable vape devices from the roadside and extract the rechargeable lithium cells inside. He explains why these devices contain the same circuitry as rechargeable ones and how to reuse the cells.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

Tech Ingredients shows how to build cheap, high-performance flat-panel speakers using audio exciters on sheet materials such as foam-core board. It explains how distributed-mode speakers work and walks through experiments to find good designs.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

GE Lighting's official how-to for factory resetting C by GE smart bulbs, using a long sequence of precisely timed on and off cycles.

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

CuriousMarc inspects a newly arrived Teletype Model 19, an early military unit built around a Model 15 keyboard and printer, after an initial rough cleaning. It is the first part of a restoration series and touches on 5-bit Baudot code.

Ben Eater finishes building a minimal VGA video card from logic circuits. He explains analog RGB signals, stores an image in an EEPROM and builds a simple digital-to-analog converter to display it.

The Thought Emporium shows how easily bacteria can be genetically modified to produce fluorescent proteins and even bioluminesce, with techniques doable at home. It links to companion videos on incubators, DNA extraction and gels.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.