raspberry pi

Jon Gjengset's long live-coding stream explains Rust's Pin and Unpin types: why they exist, how they work, and how they connect to futures and async/await. It also covers moving from pre-pinning code to the new model.

A short, nearly wordless demonstration of making sourdough pizza at home using a cast iron pan and the oven. It shows a Neapolitan-style result without a pizza steel or stone.

Andreas Kling live-codes a prototype JavaScript JIT compiler for the LibJS engine used in SerenityOS and Ladybird. He builds a standalone bytecode VM, a simple interpreter, and then a simple JIT in about 80 minutes.

In this American Masters clip, Jacques Pepin shows two different techniques for making a perfect omelet, a dish he is famous for teaching America.

Jacques Pepin demonstrates deboning a whole chicken, quickly and with complete control. It is a short, wordless-feeling technique demo that shows a skill most cooks never learn.

Jacques Pepin makes a classic French omelette in a short uncut demonstration. The video contrasts it with the American style.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

A short first episode in Zaiste's Doom Emacs series, showing how to get started with Doom, an Emacs configuration aimed at Vim users. It presents Doom as a polished, fast, batteries-included distribution.

Inigo Quilez live-codes the "Happy Jumping" animated scene in a Shadertoy GLSL shader over about six hours. He builds the raymarched character step by step, explaining the math and procedural techniques, with checkpoints linked for each stage.

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Big Clive shows how to pick up discarded disposable vape devices from the roadside and extract the rechargeable lithium cells inside. He explains why these devices contain the same circuitry as rechargeable ones and how to reuse the cells.

Jeremy Howard's 90-minute practical tour of language models. It covers how they work, GPT-4's capabilities and limits, using the OpenAI API, code writing, data analysis and fine-tuning.

A three-minute Emacs Rocks screencast by Magnar Sveen demonstrating paredit, which edits Lisp code structurally as a tree of s-expressions rather than characters.

George Brocklehurst of thoughtbot demonstrates Vim's built-in completion mechanisms, from word, line and block completion to ctags. The aim is to type less and make fewer typos.

James Hoffmann demonstrates his AeroPress technique with a short recipe: 11g of coffee, 200g of just-boiled water, a 2-minute immersion, then a press. He explains why he skips rinsing, preheating and inverting.

Lock-picking YouTuber Bill Johnson (BosnianBill) explains how to choose a high-security lock and why, showing examples and comparing designs. It covers what makes some padlocks more pick-resistant than others.

A screencast tutorial on Specter, a Clojure library for navigating and transforming nested data structures declaratively, demonstrated in a REPL.

Ben Krasnow of Applied Science shows how to make and test YBCO high-temperature superconductor with a kiln and eBay chemicals. He demonstrates flux pinning and shows a close-up of the crystal structure.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.

Animator Joel Haver explains how he makes his short films using rotoscoping and the EbSynth tool, along with the software he uses. The method is a labor-intensive, frame-by-frame process.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

Dave Jones builds the Evil Mad Scientist discrete-component 555 timer kit, then tests it and explains the internal circuitry of the 555 at transistor level. He finishes with scope waveforms.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

GE Lighting's official how-to for factory resetting C by GE smart bulbs, using a long sequence of precisely timed on and off cycles.

The first episode of Clickspring's series building a John Wilding skeleton clock from raw stock in a home machine shop. It covers making the frames along with the tools needed for the job.