ui

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Everyday Astronaut's guide to visiting Starbase, Texas to see Starship, covering what and where it is, which areas close during launches, where to watch from, where to fly into and stay, and things to do.

Dean Friedman's near-hour-long introduction to synthesis, covering the building blocks of sound and the controls on a synthesizer. He slowly adjusts knobs so viewers hear what each parameter does.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

Tech Ingredients shows how to build cheap, high-performance flat-panel speakers using audio exciters on sheet materials such as foam-core board. It explains how distributed-mode speakers work and walks through experiments to find good designs.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Dan Worrall explains when higher sample rates help in recording and mixing, and when they do not. He goes into oversampling versus higher sample rates, and aliasing in distortion plugins.

A tutorial in the GAS Therapy series showing how to recreate the Teenage Engineering OP-1 and OP-1 Field with free software. It argues you do not need to buy expensive gear to make music.

The first stream in the Emacs From Scratch series, building a custom Emacs configuration from zero while teaching basics. It covers a usable baseline setup and the packages for completion, themes and productivity.

Tech Ingredients shows how to build flat panel speakers from exciters and foam board, with construction guidelines, measured SPL comparisons and a complete system playing music.

Ben Eater finishes building a minimal VGA video card from logic circuits. He explains analog RGB signals, stores an image in an EEPROM and builds a simple digital-to-analog converter to display it.

Matt Risinger covers installing a Zehnder ERV fresh-air system in a tight passive house, explaining balanced ventilation, the benefits of heat recovery and the costs involved.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

Russ Cox gives a 23-minute tour of the Acme text editor from Plan 9, showing its mouse-driven interface, executing commands from text, and its filesystem-based interface to other programs.

Allieway Audio gives an informal introduction and live-coding demo of ORCA, a free esoteric programming environment for building procedural sequencers from Hundred Rabbits. It walks through the interface and how to make music with it.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.

George Brocklehurst of thoughtbot demonstrates Vim's built-in completion mechanisms, from word, line and block completion to ctags. The aim is to type less and make fewer typos.

Ben Eater writes a program in a made-up machine language and walks through the control logic an 8-bit breadboard CPU needs to execute it. It is part of his build-an-8-bit-computer series.

Tech Ingredients shows how to build a liquid panel with a specialty paint that, placed outside, cools below ambient air temperature. It demonstrates radiative sky cooling.

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

Andrew Huang teaches the basics of music theory in about half an hour, covering intervals, chords and patterns. He stresses understanding how music works over memorizing terminology.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

NightHawkInLight shows how to make ultra-white radiative paint that cools surfaces below ambient temperature without electricity. He walks through the research papers and the household-materials process.

The first lesson of MangoJelly's FreeCAD 0.20 beginner course, covering setup, preferences and navigation. The series teaches fundamentals through complete workflows such as sketching, Part Design and STL export.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

Harry Schwartz gives a roughly hour-long tour of Emacs Org mode as an outliner, task manager, markup language and agenda tool. He demonstrates how he uses it for documents, presentations and todo lists.

Dave Jones of EEVblog shows hand soldering of surface-mount parts, including drag soldering and tack-and-reflow of 0.5mm fine-pitch ICs, with solder paste and hot air.

British Museum curator Irving Finkel teaches how to write cuneiform, with a colleague following along. It is a short, lively introduction to the script.

Dave Jones of EEVblog and Richard Stephenson tour the 70m DSS43 dish at the Canberra Deep Space Communication Complex and explain how NASA talks to Voyager 2. It covers the transmitters, receivers and tracking involved.

Marco Baringer's tutorial video on SLIME, the Emacs mode for developing Common Lisp. It demonstrates the interactive workflow of working against a live Lisp image.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

LifebyMikeG lists 15 common mistakes beginner sourdough bakers make, with advice on fixing sticky, wet dough and other issues.

Loopop reviews the Polyend Tracker hardware tracker-style sequencer and walks through a tutorial from sampling to finishing a song. It covers most of the device's features.

Inigo Quilez live-codes a cartoon character painting entirely from math, using signed distance fields in a Shadertoy shader. He explains each step of building the image from formulas.

Inigo Quilez live-paints a mountain landscape using only math in a shader, building up from a basic polynomial noise surface through fractal terrain, lighting and atmosphere. The code runs in real time on Shadertoy so viewers can edit it as they follow along.

Inigo Quilez live-codes a painting using only mathematics in a shader, building it up step by step. The linked Shadertoy source shows the result.

Tech Ingredients shows how to make a homemade radiative cooling paint, with a custom liquid panel that cools below ambient temperature outdoors. The video covers the materials and how to apply the paint.