emi

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

NightHawkInLight shows how to make radiative sky cooling paint from grocery and hardware store materials, including a novel calcium carbonate microsphere synthesis. The paint can cool a surface below ambient air temperature in direct sunlight without electricity.

Jeri Ellsworth shows early steps of making microchips at home: cleaving wafers, removing native oxide, testing dopant type with a hot probe, and loading the furnace.

Ben Krasnow of Applied Science shows how to make small batches of specialty glass with minimal equipment, including designing and making photochromic glass. He covers ingredients, melting and the challenges involved.

NightHawkInLight shows how to make ultra-white radiative paint that cools surfaces below ambient temperature without electricity. He walks through the research papers and the household-materials process.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

Ben Krasnow of Applied Science uses an antique 4x5 view camera to make high-resolution photolithography masks in a home shop. He photographs a poster-sized printout onto litho film to get features around 20 microns.

Ben Krasnow of Applied Science shows how to make and test YBCO high-temperature superconductor with a kiln and eBay chemicals. He demonstrates flux pinning and shows a close-up of the crystal structure.

Ben Eater starts a series building a working computer on breadboards around the 6502 microprocessor. In this first part he gets a 'hello world' running from scratch.

Ben Eater explains how VGA signals work and builds a breadboard circuit that produces correct sync timing so a monitor recognizes the signal. He then builds toward displaying an image from simple logic chips.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

A short video of stretching and hand exercises for preventing and easing tendinitis and carpal tunnel syndrome, from a percussion teacher. The exercises were shown to him by a doctor.

Tech Ingredients shows how to make a homemade radiative cooling paint, with a custom liquid panel that cools below ambient temperature outdoors. The video covers the materials and how to apply the paint.

A short promotional video demonstrating a head-thumping technique that is claimed to relieve tinnitus. Covering the ears and tapping the back of the head is said to silence the ringing temporarily.

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

Ben Eater writes a program in a made-up machine language and walks through the control logic an 8-bit breadboard CPU needs to execute it. It is part of his build-an-8-bit-computer series.

Jerobeam Fenderson shows how to draw a mushroom on an oscilloscope in XY mode using stereo audio, then animates it by modulating with a larger wave. Pd and Max4Live patches are provided.

ElectroBOOM's Mehdi Sadaghdar explains how a full bridge rectifier works, the building block of AC to DC converters, with his usual humor and a demonstration of the circuit.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

Dave Jones of EEVblog shows hand soldering of surface-mount parts, including drag soldering and tack-and-reflow of 0.5mm fine-pitch ICs, with solder paste and hot air.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

Dave Jones builds the Evil Mad Scientist discrete-component 555 timer kit, then tests it and explains the internal circuitry of the 555 at transistor level. He finishes with scope waveforms.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Ben Eater shows how to build logic gates out of transistors, including NOR gates. It is part of his clear hardware-from-scratch teaching style.

A three-minute demonstration of professional hand-soldering techniques for multi-lead surface mount parts, to IPC class 3 criteria.

Big Clive gives a 38-minute beginner's guide to identifying common electronic components and what they do. He keeps the maths minimal and aims to fill gaps for people just starting out.

Dave Jones of EEVblog and Richard Stephenson tour the 70m DSS43 dish at the Canberra Deep Space Communication Complex and explain how NASA talks to Voyager 2. It covers the transmitters, receivers and tracking involved.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

Andreas Spiess explains the basic principles of LoRa and LoRaWAN, their pros and cons, link budget and bandwidth. He shows his own gateway and client sending a message to The Things Network.

Ben Eater finishes building a minimal VGA video card from logic circuits. He explains analog RGB signals, stores an image in an EEPROM and builds a simple digital-to-analog converter to display it.

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

The Thought Emporium shows how easily bacteria can be genetically modified to produce fluorescent proteins and even bioluminesce, with techniques doable at home. It links to companion videos on incubators, DNA extraction and gels.

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

Martin Gorner's Devoxx talk introduces deep learning with TensorFlow, walking through neural networks for MNIST, how to choose an architecture and how to diagnose networks that fail to train.