high-speed design

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

Lock-picking YouTuber Bill Johnson (BosnianBill) explains how to choose a high-security lock and why, showing examples and comparing designs. It covers what makes some padlocks more pick-resistant than others.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

Ben Krasnow of Applied Science shows how to make small batches of specialty glass with minimal equipment, including designing and making photochromic glass. He covers ingredients, melting and the challenges involved.

Mathologer shows a simple idea, the commutator, that lets anyone who can solve the first layer design their own full Rubik's cube solution. The same idea carries over to other symmetric twisty puzzles such as the Megaminx.

The trailer for Tim Hunkin's series The Secret Life of Components, eight guides to mechanical and electromechanical parts for designers and makers.

Dan Worrall explains when higher sample rates help in recording and mixing, and when they do not. He goes into oversampling versus higher sample rates, and aliasing in distortion plugins.

John Scholes builds a depth-first tree-search operator step by step in a Dyalog APL session. It covers higher-order functions and runs the search on the N-Queens problem.

The first part of Robert Baruch's series on building a 6800 CPU on an FPGA with nMigen, a Python-based hardware description language. It introduces the HDL while implementing a simpler 6800 core.

Shawn Hymel of DigiKey introduces KiCad and explains how printed circuit boards are manufactured. It is the first part of a beginner series that builds a 555 badge project.

Ben Krasnow of Applied Science shows how to make and test YBCO high-temperature superconductor with a kiln and eBay chemicals. He demonstrates flux pinning and shows a close-up of the crystal structure.

A step-by-step guide to building a lifter, a small triangular ionocraft made from balsa wood, aluminum foil and thin wire, powered by a high-voltage supply. It also shows high-voltage safety practices.

The UK DVSA's one-minute guide to the hazard perception part of the driving theory test, covering when to click and how to score well.

Alan Becker's short series on the 12 principles of animation, covering squash and stretch, anticipation, staging, timing, arcs, appeal and the rest. Each principle gets a brief animated illustration.

Applied Science builds a replica Apollo DSKY using an electroluminescent driver circuit and screen-printed conductive ink, with source and PCB files published.

Tech Ingredients shows how to build cheap, high-performance flat-panel speakers using audio exciters on sheet materials such as foam-core board. It explains how distributed-mode speakers work and walks through experiments to find good designs.

Bisqwit writes a NES emulator in C++ in about 15 minutes of tool-assisted, sped-up coding, narrated with captions. It shows an accurate emulator built with a compile-time generated 6502 instruction table. Part 2 covers compiling and running it.

Ben Krasnow of Applied Science explains how electrophoretic e-paper displays work and how he modified the driver firmware and waveform lookup tables of a 4.2-inch panel to reach roughly 3Hz partial refresh. It covers the tweakable constants in the refresh process and touches on colored e-ink microcapsules.

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

The first lesson of MangoJelly's FreeCAD 0.20 beginner course, covering setup, preferences and navigation. The series teaches fundamentals through complete workflows such as sketching, Part Design and STL export.

The Thought Emporium shows how to receive clear images directly from GOES-15, 16 and 17 and Himawari 8 geostationary weather satellites with software-defined radio. It covers the extra effort needed to receive GOES data.

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

Loopop reviews the Polyend Tracker hardware tracker-style sequencer and walks through a tutorial from sampling to finishing a song. It covers most of the device's features.

Matt Risinger covers installing a Zehnder ERV fresh-air system in a tight passive house, explaining balanced ventilation, the benefits of heat recovery and the costs involved.

Ben Krasnow of Applied Science uses an antique 4x5 view camera to make high-resolution photolithography masks in a home shop. He photographs a poster-sized printout onto litho film to get features around 20 microns.

Tech Ingredients builds a pair of large Voigt speakers and explains ported, transmission line and horn designs. It tests them in an anechoic chamber and uses constrained layer damping for the enclosure.