ps/2

Ben Eater explains how the PS/2 keyboard interface works, covering its clocked serial protocol and scancodes. He builds up the hardware-level understanding needed to read keypresses.

A walkthrough of installing Synapse, Riot and Jitsi from scratch on Debian to run your own Matrix communication service. The description warns it is now quite outdated and links to updated material.

Ben Eater explains how a USB keyboard communicates, covering the electrical interface, bit and packet encoding, packet contents, and a comparison with PS/2.

A roughly 10-minute guided Non-Sleep Deep Rest session voiced by neuroscientist Andrew Huberman. It is meant to reduce daytime fatigue, improve focus and aid sleep.

A Harvard Business Review video with tactics for getting better at small talk and enjoying it, such as setting goals, allowing pauses, and starting and ending conversations.

Ben Vallack walks through designing a custom keyboard PCB from scratch using Ergogen and KiCad, ending with a gerber file ready to order from a PCB fabricator. The example is a split keyboard.

NightHawkInLight shows how to make ultra-white radiative paint that cools surfaces below ambient temperature without electricity. He walks through the research papers and the household-materials process.

A beginner-focused tutorial on freehand knife sharpening with a single stone, aiming for a shaving-sharp edge in about five minutes.

Kristy Viers demonstrates the iPhone Magnifier combined with VoiceOver to describe the user's surroundings. She shows how the built-in feature reports scenes, faces and lighting.

DIY Perks builds a webcam mod using a two-way mirror in a box so the camera sits behind the screen image. This allows real eye contact on video calls.

A roughly three-hour screen recording of designing a barebones STM32F4 board in KiCad, covering schematic, four-layer layout and routing, USB and a buck converter. It ends with ordering manufacture and assembly through JLCPCB.

A 100-minute tutorial from Phil's Lab on designing an STM32-based 'black pill' PCB in KiCad 6. It covers schematic capture, two-layer layout and routing, USB, and sending the board for manufacture and assembly.

Big Clive shows how to pick up discarded disposable vape devices from the roadside and extract the rechargeable lithium cells inside. He explains why these devices contain the same circuitry as rechargeable ones and how to reuse the cells.

Kenneth Finnegan shows how USB-C Power Delivery trigger boards like the ZY12PDN negotiate 5V to 20V so you can power projects from a USB-C charger, including the color coding for each voltage.

This Old House's Ross Trethewey explains MERV filter ratings and how air filtration works, then shows how to build a localized DIY air filter, including a box fan with multiple filters.

Dan Worrall explains when higher sample rates help in recording and mixing, and when they do not. He goes into oversampling versus higher sample rates, and aliasing in distortion plugins.

Tech Ingredients shows how to build a liquid panel with a specialty paint that, placed outside, cools below ambient air temperature. It demonstrates radiative sky cooling.

Loopop reviews the Polyend Tracker hardware tracker-style sequencer and walks through a tutorial from sampling to finishing a song. It covers most of the device's features.

Matt Risinger covers installing a Zehnder ERV fresh-air system in a tight passive house, explaining balanced ventilation, the benefits of heat recovery and the costs involved.

DIY Perks shows how to modify devices that use older USB connectors so they charge and connect over USB Type-C. He solders in a USB-C connector board and works through cases such as dongle-dependent gadgets and a mouse receiver.

Ben Krasnow of Applied Science uses an antique 4x5 view camera to make high-resolution photolithography masks in a home shop. He photographs a poster-sized printout onto litho film to get features around 20 microns.

A tutorial in the GAS Therapy series showing how to recreate the Teenage Engineering OP-1 and OP-1 Field with free software. It argues you do not need to buy expensive gear to make music.

A short walkthrough of a hack that tricks a Brother laser printer into accepting third-party toner by working around its genuine-toner check. It notes this may void the warranty.

A reupload of Joel Spolsky's talk teaching spreadsheet users the Excel features they are probably missing, such as keyboard navigation, named ranges, tables and lookups. The original disappeared and this copy comes from the Wayback Machine.

Imphenzia's 83-minute tutorial covers the low poly modeling techniques he learned over five years of Blender use, with timestamps from navigation and extrusion onward. It uses Blender 2.83 with default keys.

A 12-minute beginner lesson from Nick Milo's Linking Your Thinking series introducing the Obsidian note-taking app and the first steps to start using it.

James Hoffmann demonstrates his AeroPress technique with a short recipe: 11g of coffee, 200g of just-boiled water, a 2-minute immersion, then a press. He explains why he skips rinsing, preheating and inverting.

A guided Wim Hof breathing session of three rounds at a slow pace, building from a 30 second to a 90 second breath hold. An on-screen bubble animation helps you keep the rhythm.